外设驱动用例

本节提供了各外设模块的驱动使用示例，展示了每个外设 IP 的初始化配置、核心接口调用及功能验证流程，可作为驱动开发的参考。

ACRYP

• 1. Acryp_completion_it
  • 1.1. Function description:
  • 1.2. Main Configuration:
    • 1.2.1. MOD operation:
  • 1.3. Test result:
  • 1.4. IO connection:
• 2. Double_fun_ctest_gf2m
  • 2.1. Function description:
  • 2.2. Main Configuration:
    • 2.2.1. INV_N0 operation:
    • 2.2.2. MOD operation:
    • 2.2.3. MontMult operation:
    • 2.2.4. PDBL operation:
  • 2.3. Test result:
  • 2.4. IO connection:
• 3. Double_fun_ctest_gfp
  • 3.1. Function description:
  • 3.2. Main Configuration:
    • 3.2.1. INV_N0 operation:
    • 3.2.2. MOD operation:
    • 3.2.3. MontMult operation:
    • 3.2.4. PDBL operation:
    • 3.2.5. PTC operation:
  • 3.3. Test result:
  • 3.4. IO connection:
• 4. Edwards_25519_add_fun_ctest_gfp
  • 4.1. Function description:
  • 4.2. Main Configuration:
    • 4.2.1. INV_N0 operation:
    • 4.2.2. ED25519_PADD operation:
    • 4.2.3. MOD operation:
  • 4.3. Test result:
  • 4.4. IO connection:
• 5. Edwards_25519_kmul_fun_ctest_gfp
  • 5.1. Function description:
  • 5.2. Main Configuration:
    • 5.2.1. INV_N0 operation:
    • 5.2.2. ED25519_kMUL operation:
    • 5.2.3. MOD operation:
  • 5.3. Test result:
  • 5.4. IO connection:
• 6. Edwards_25519_sign
  • 6.1. Function description:
  • 6.2. Test result:
  • 6.3. IO connection:
• 7. Edwards_25519_sign_verify
  • 7.1. Function description:
  • 7.2. Test result:
  • 7.3. IO connection:
• 8. Edwards_25519_verify_no_mbedtls
  • 8.1. Function description:
  • 8.2. Test result:
  • 8.3. IO connection:
• 9. Edwards_448_add_fun_ctest_gfp
  • 9.1. Function description:
  • 9.2. Main Configuration:
    • 9.2.1. INV_N0 operation:
    • 9.2.2. ED448_PADD operation:
    • 9.2.3. MOD operation:
  • 9.3. Test result:
  • 9.4. IO connection:
• 10. Edwards_448_kmul_fun_ctest_gfp
  • 10.1. Function description:
  • 10.2. Main Configuration:
    • 10.2.1. INV_N0 operation:
    • 10.2.2. ED448_kMUL operation:
    • 10.2.3. MOD operation:
  • 10.3. Test result:
  • 10.4. IO connection:
• 11. Edwards_ptc_fun_ctest_gfp
  • 11.1. Function description:
  • 11.2. Main Configuration:
    • 11.2.1. INV_N0 operation:
    • 11.2.2. MOD operation:
    • 11.2.3. ED PTC operation:
  • 11.3. Test result:
  • 11.4. IO connection:
• 12. Inv_fun_ctest_gfp
  • 12.1. Function description:
  • 12.2. Main Configuration:
    • 12.2.1. INV operation:
  • 12.3. Test result:
  • 12.4. IO connection:
• 13. Mexp_fun_ctest_gfp
  • 13.1. Function description:
  • 13.2. Main Configuration:
    • 13.2.1. INV_N0 operation:
    • 13.2.2. MOD operation:
    • 13.2.3. MEXP operation:
  • 13.3. Test result:
  • 13.4. IO connection:
• 14. MMAC_fun_ctest_GF2M
  • 14.1. Function description:
  • 14.2. Main Configuration:
    • 14.2.1. MMAC operation:
  • 14.3. Test result:
  • 14.4. IO connection:
• 15. Mmac_fun_ctest_gfp
  • 15.1. Function description:
  • 15.2. Main Configuration:
    • 15.2.1. MMAC operation:
  • 15.3. Test result:
  • 15.4. IO connection:
• 16. Mod_fun_ctest_gf2m
  • 16.1. Function description:
  • 16.2. Main Configuration:
    • 16.2.1. MOD operation:
  • 16.3. Test result:
  • 16.4. IO connection:
• 17. Mod_fun_ctest_gfp
  • 17.1. Function description:
  • 17.2. Main Configuration:
    • 17.2.1. MOD operation:
  • 17.3. Test result:
  • 17.4. IO connection:
• 18. Montgomery_25519_kmul_fun_ctest_gfp
  • 18.1. Function description:
  • 18.2. Main Configuration:
    • 18.2.1. INV_N0 operation:
    • 18.2.2. ED25519_kMUL operation:
    • 18.2.3. MOD operation:
  • 18.3. Test result:
  • 18.4. IO connection:
• 19. Montmult_fun_ctest_gfp
  • 19.1. Function description:
  • 19.2. Main Configuration:
    • 19.2.1. INV_N0 operation:
    • 19.2.2. MontMult operation:
    • 19.2.3. MOD operation:
  • 19.3. Test result:
  • 19.4. IO connection:
• 20. Mul_fun_ctest
  • 20.1. Function description:
  • 20.2. Main Configuration:
    • 20.2.1. MUL operation:
  • 20.3. Test result:
  • 20.4. IO connection:
• 21. Point_add_fun_ctest_gf2m
  • 21.1. Function description:
  • 21.2. Main Configuration:
    • 21.2.1. INV_N0 operation:
    • 21.2.2. MOD operation:
    • 21.2.3. MontMult operation:
    • 21.2.4. PADD operation:
  • 21.3. Test result:
  • 21.4. IO connection:
• 22. Point_add_fun_ctest_gfp
  • 22.1. Function description:
  • 22.2. Main Configuration:
    • 22.2.1. INV_N0 operation:
    • 22.2.2. MOD operation:
    • 22.2.3. MontMult operation:
    • 22.2.4. PADD operation:
    • 22.2.5. PTC operation:
  • 22.3. Test result:
  • 22.4. IO connection:
• 23. Short_weierstrass_kmul_fun_ctest_gf2m
  • 23.1. Function description:
  • 23.2. Main Configuration:
    • 23.2.1. INV_N0 operation:
    • 23.2.2. MOD operation:
    • 23.2.3. MontMult operation:
    • 23.2.4. kMUL operation:
  • 23.3. Test result:
  • 23.4. IO connection:
• 24. Short_weierstrass_kmul_fun_ctest_gfp
  • 24.1. Function description:
  • 24.2. Main Configuration:
    • 24.2.1. INV_N0 operation:
    • 24.2.2. MOD operation:
    • 24.2.3. MontMult operation:
    • 24.2.4. kMUL operation:
  • 24.3. Test result:
  • 24.4. IO connection:
• 25. Sm2_pubkey_check
  • 25.1. Function description:
  • 25.2. Test result:
  • 25.3. IO connection:
• 26. rsa_2048bits_verify
  • 26.1. Function description:
  • 26.2. Test result:
  • 26.3. IO connection:
• 27. rsa_4096bits_verify
  • 27.1. Function description:
  • 27.2. Test result:
  • 27.3. IO connection:

BASIC_TIMER

• 1. Cpu_config
  • 1.1. Function description:
  • 1.2. Test result:
  • 1.3. IO connection:
• 2. Dma_config
  • 2.1. Function description:
  • 2.2. Test result:
  • 2.3. IO connection:

DCMI

• 1. Dcmi_get_frame_info
  • 1.1. Function description:
  • 1.2. Test result:
  • 1.3. IO connection:
• 2. Dcmi_line_int
  • 2.1. Function description:
  • 2.2. Test result:
  • 2.3. IO connection:
• 3. Dcmi_overflow_int
  • 3.1. Function description:
  • 3.2. Test result:
  • 3.3. IO connection:
• 4. Dcmi_rgb565_ab
  • 4.1. Function description:
  • 4.2. Test result:
  • 4.3. IO connection:
• 5. Dcmi_rgb565_ab_disp_one_layer
  • 5.1. Function description:
  • 5.2. Test result:
  • 5.3. IO connection:
• 6. Dcmi_rgb565_ab_g2d_disp_one_layer
  • 6.1. Function description:
  • 6.2. Test result:
  • 6.3. IO connection:
• 7. Dcmi_rgb565_crop
  • 7.1. Function description:
  • 7.2. Test result:
  • 7.3. IO connection:
• 8. Dcmi_rgb565_down_sample
  • 8.1. Function description:
  • 8.2. Test result:
  • 8.3. IO connection:
• 9. Dcmi_rgb565_in_gray_histen_out
  • 9.1. Function description:
  • 9.2. Test result:
  • 9.3. IO connection:
• 10. Dcmi_rgb565_in_rgb565_out
  • 10.1. Function description:
  • 10.2. Test result:
  • 10.3. IO connection:
• 11. Dcmi_rgb565_in_rgb888_out
  • 11.1. Function description:
  • 11.2. Test result:
  • 11.3. IO connection:
• 12. Dcmi_rgb565_in_rgb_channel_out
  • 12.1. Function description:
  • 12.2. Test result:
  • 12.3. IO connection:
• 13. Dcmi_vs_ef_int
  • 13.1. Function description:
  • 13.2. Test result:
  • 13.3. IO connection:

FFT

• 1. Fft_exter_int
  • 1.1. Function description:
  • 1.2. Test result:
  • 1.3. IO connection:
• 2. Fft_int
  • 2.1. Function description:
  • 2.2. Test result:
  • 2.3. IO connection:
• 3. Fft_q15_freq_1024points
  • 3.1. Function description:
  • 3.2. Test result:
  • 3.3. IO connection:
• 4. Fft_q15_freq_16points
  • 4.1. Function description:
  • 4.2. Test result:
  • 4.3. IO connection:
• 5. Fft_q15_time_1024points
  • 5.1. Function description:
  • 5.2. Test result:
  • 5.3. IO connection:
• 6. Fft_q15_time_16points
  • 6.1. Function description:
  • 6.2. Test result:
  • 6.3. IO connection:
• 7. Fft_q31_freq_16points
  • 7.1. Function description:
  • 7.2. Test result:
  • 7.3. IO connection:
• 8. Fft_q31_freq_16points_r
  • 8.1. Function description:
  • 8.2. Test result:
  • 8.3. IO connection:
• 9. Fft_q31_freq_16points_r_i
  • 9.1. Function description:
  • 9.2. Test result:
  • 9.3. IO connection:
• 10. Fft_q31_freq_16points_rnin
  • 10.1. Function description:
  • 10.2. Test result:
  • 10.3. IO connection:
• 11. Fft_q31_freq_32points
  • 11.1. Function description:
  • 11.2. Test result:
  • 11.3. IO connection:
• 12. Fft_q31_time_16points
  • 12.1. Function description:
  • 12.2. Test result:
  • 12.3. IO connection:
• 13. Fft_q31_time_512points
  • 13.1. Function description:
  • 13.2. Test result:
  • 13.3. IO connection:
• 14. Fft_q31_time_64points
  • 14.1. Function description:
  • 14.2. Test result:
  • 14.3. IO connection:
• 15. Fft_rw_err_int
  • 15.1. Function description:
  • 15.2. Test result:
  • 15.3. IO connection:
• 16. Ifft_q15_freq_16points
  • 16.1. Function description:
  • 16.2. Test result:
  • 16.3. IO connection:
• 17. Ifft_q15_freq_2048points
  • 17.1. Function description:
  • 17.2. Test result:
  • 17.3. IO connection:
• 18. Ifft_q15_time_16points
  • 18.1. Function description:
  • 18.2. Test result:
  • 18.3. IO connection:
• 19. Ifft_q15_time_4096points
  • 19.1. Function description:
  • 19.2. Test result:
  • 19.3. IO connection:
• 20. Ifft_q31_freq_16points
  • 20.1. Function description:
  • 20.2. Test result:
  • 20.3. IO connection:
• 21. Ifft_q31_freq_256points
  • 21.1. Function description:
  • 21.2. Test result:
  • 21.3. IO connection:
• 22. Ifft_q31_time_128points
  • 22.1. Function description:
  • 22.2. Test result:
  • 22.3. IO connection:
• 23. Ifft_q31_time_16points
  • 23.1. Function description:
  • 23.2. Test result:
  • 23.3. IO connection:
• 24. Q15_add_offset
  • 24.1. Function description:
  • 24.2. Test result:
  • 24.3. IO connection:
• 25. Q15_complex_mul_complex
  • 25.1. Function description:
  • 25.2. Test result:
  • 25.3. IO connection:
• 26. Q15_real_mul_real
  • 26.1. Function description:
  • 26.2. Test result:
  • 26.3. IO connection:
• 27. Q15_scale
  • 27.1. Function description:
  • 27.2. Test result:
  • 27.3. IO connection:
• 28. Q31_add_offset
  • 28.1. Function description:
  • 28.2. Test result:
  • 28.3. IO connection:
• 29. Q31_complex_mul_complex
  • 29.1. Function description:
  • 29.2. Test result:
  • 29.3. IO connection:
• 30. Q31_real_mul_real
  • 30.1. Function description:
  • 30.2. Test result:
  • 30.3. IO connection:
• 31. Q31_scale
  • 31.1. Function description:
  • 31.2. Test result:
  • 31.3. IO connection:

FRTDEC

• 1. Frtdec_aes_decrypt_data_only
  • 1.1. Function description:
  • 1.2. Detail configuration:
  • 1.3. Test result:
  • 1.4. IO connection:
• 2. Frtdec_aes_decrypt_data_only_region1
  • 2.1. Function description:
  • 2.2. Detail configuration:
  • 2.3. Test result:
  • 2.4. IO connection:
• 3. Frtdec_execute_only_error_int
  • 3.1. Function description:
  • 3.2. Detail configuration:
  • 3.3. Test result:
  • 3.4. IO connection:
• 4. Frtdec_security_error_int
  • 4.1. Function description:
  • 4.2. Test result:
  • 4.3. IO connection:
• 5. Frtdec_sm4_decrypt_data_only_region2
  • 5.1. Function description:
  • 5.2. Detail configuration:
  • 5.3. Test result:
  • 5.4. IO connection:
• 6. Frtdec_sm4_decrypt_data_only_region3
  • 6.1. Function description:
  • 6.2. Detail configuration:
  • 6.3. Test result:
  • 6.4. IO connection:

GMC

• 1. Not_enable_access_sram_bus_error
  • 1.1. Function description:
  • 1.2. Detail configuration:
    • 1.2.1. Sram controller
    • 1.2.2. Timing configure
  • 1.3. Test result:
  • 1.4. IO connection:
• 2. Not_enable_gmc_sdram_bus_error
  • 2.1. Function description:
  • 2.2. Detail configuration:
    • 2.2.1. Sdram controller
    • 2.2.2. Timing configure
    • 2.2.3. Command mode
    • 2.2.4. Refresh rate
    • 2.2.5. Misc
  • 2.3. Test result:
  • 2.4. IO connection:
• 3. Sdram_16Bit_wr_test
  • 3.1. Function description:
  • 3.2. Detail configuration:
    • 3.2.1. Sdram controller
    • 3.2.2. Timing configure
    • 3.2.3. Command mode
    • 3.2.4. Refresh rate
    • 3.2.5. Misc
  • 3.3. Test result:
  • 3.4. IO connection:
• 4. Sdram_32Bit_wr_test
  • 4.1. Function description:
  • 4.2. Detail configuration:
    • 4.2.1. Sdram controller
    • 4.2.2. Timing configure
    • 4.2.3. Command mode
    • 4.2.4. Refresh rate
    • 4.2.5. Misc
  • 4.3. Test result:
  • 4.4. IO connection:
• 5. Sdram_8Bit_wr_test
  • 5.1. Function description:
  • 5.2. Detail configuration:
    • 5.2.1. Sdram controller
    • 5.2.2. Timing configure
    • 5.2.3. Command mode
    • 5.2.4. Refresh rate
    • 5.2.5. Misc
  • 5.3. Test result:
  • 5.4. IO connection:
• 6. Sdram_udma_wr_test
  • 6.1. Function description:
  • 6.2. Detail configuration:
    • 6.2.1. Sdram controller
    • 6.2.2. Timing configure
    • 6.2.3. Command mode
    • 6.2.4. Refresh rate
    • 6.2.5. Misc
    • 6.2.6. Udma m2m configure
  • 6.3. Test result:
  • 6.4. IO connection:
• 7. Sram_bank1_wr_test
  • 7.1. Function description:
  • 7.2. Detail configuration:
    • 7.2.1. Sram controller
    • 7.2.2. Timing configure
  • 7.3. Test result:
  • 7.4. IO connection:
• 8. Sram_bank1_wr_test
  • 8.1. Function description:
  • 8.2. Detail configuration:
    • 8.2.1. Sram controller
    • 8.2.2. Timing configure
  • 8.3. Test result:
  • 8.4. IO connection:
• 9. Sram_bank3_wr_test
  • 9.1. Function description:
  • 9.2. Detail configuration:
    • 9.2.1. Sram controller
    • 9.2.2. Timing configure
  • 9.3. Test result:
  • 9.4. IO connection:
• 10. Sram_bank4_wr_test
  • 10.1. Function description:
  • 10.2. Detail configuration:
    • 10.2.1. Sram controller
    • 10.2.2. Timing configure
  • 10.3. Test result:
  • 10.4. IO connection:
• 11. Sram_data_16bit_test
  • 11.1. Function description:
  • 11.2. Detail configuration:
    • 11.2.1. Sram controller
    • 11.2.2. Timing configure
  • 11.3. Test result:
  • 11.4. IO connection:
• 12. Sram_data_32bit_fetch_instruction
  • 12.1. Function description:
  • 12.2. Detail configuration:
    • 12.2.1. Sram controller
    • 12.2.2. Timing configure
  • 12.3. Test result:
  • 12.4. IO connection:
• 13. Sram_data_32bit_test
  • 13.1. Function description:
  • 13.2. Detail configuration:
    • 13.2.1. Sram controller
    • 13.2.2. Timing configure
  • 13.3. Test result:
  • 13.4. IO connection:
• 14. Sram_data_8bit_test
  • 14.1. Function description:
  • 14.2. Detail configuration:
    • 14.2.1. Sram controller
    • 14.2.2. Timing configure
  • 14.3. Test result:
  • 14.4. IO connection:
• 15. Sram_udma_wr_test
  • 15.1. Function description:
  • 15.2. Detail configuration:
    • 15.2.1. Sram controller
    • 15.2.2. Timing configure
    • 15.2.3. Udma m2m configure
  • 15.3. Test result:
  • 15.4. IO connection:

HS_SDIO

• 1. Corner_feature_test
  • 1.1. Function description:
  • 1.2. Test result:
  • 1.3. IO connection:
• 2. Cpu_1bit_wr
  • 2.1. Function description:
  • 2.2. Test result:
  • 2.3. IO connection:
• 3. Cpu_8bit_wr
  • 3.1. Function description:
  • 3.2. Test result:
  • 3.3. IO connection:
• 4. Cpu_unaligned_wr
  • 4.1. Function description:
  • 4.2. Test result:
  • 4.3. IO connection:
• 5. Emmc_copy
  • 5.1. Function description:
  • 5.2. Test result:
  • 5.3. IO connection:
• 6. Sdcard_copy
  • 6.1. Function description:
  • 6.2. Test result:
  • 6.3. IO connection:
• 7. Sdio_emmc_cpu
  • 7.1. Function description:
  • 7.2. Test result:
  • 7.3. IO connection:
• 8. Sdio_emmc_cpu_ddr_8bit
  • 8.1. Function description:
  • 8.2. Test result:
  • 8.3. IO connection:
• 9. Sdio_emmc_dma
  • 9.1. Function description:
  • 9.2. Test result:
  • 9.3. IO connection:
• 10. Sdio_emmc_dma_ddr_4bit
  • 10.1. Function description:
  • 10.2. Test result:
  • 10.3. IO connection:
• 11. Sdio_emmc_multiblk_cpu
  • 11.1. Function description:
  • 11.2. Test result:
  • 11.3. IO connection:
• 12. Sdio_emmc_multiblk_dma
  • 12.1. Function description:
  • 12.2. Test result:
  • 12.3. IO connection:
• 13. Sdio_sdcard_cpu
  • 13.1. Function description:
  • 13.2. Test result:
  • 13.3. IO connection:
• 14. Sdio_sdcard_dma
  • 14.1. Function description:
  • 14.2. Test result:
  • 14.3. IO connection:
• 15. Sdio_sdcard_multiblk_cpu
  • 15.1. Function description:
  • 15.2. Test result:
  • 15.3. IO connection:
• 16. Sdio_sdcard_multiblk_dma
  • 16.1. Function description:
  • 16.2. Test result:
  • 16.3. IO connection:
• 17. Sdio_wifi_ap
  • 17.1. Function description:
  • 17.2. Test result:
  • 17.3. IO connection:
• 18. Transmitter_wr_1bit_int
  • 18.1. Function description:
  • 18.2. Test result:
  • 18.3. IO connection:
• 19. Transmitter_wr_8bit_int
  • 19.1. Function description:
  • 19.2. IO connection:
• 20. Udma_1bit_wr
  • 20.1. Function description:
  • 20.2. Test result:
  • 20.3. IO connection:
• 21. Udma_8bit_wr
  • 21.1. Function description:
  • 21.2. Test result:
  • 21.3. IO connection:

I2C2ICB

• 1. Read_data
  • 1.1. Function description:
  • 1.2. Test result:
  • 1.3. IO connection:
• 2. Write_data
  • 2.1. Function description:
  • 2.2. Test result:
  • 2.3. IO connection:

IWDG

• 1. Feed
  • 1.1. Function description:
  • 1.2. Test result:
  • 1.3. IO connection:
• 2. Reset
  • 2.1. Function description:
  • 2.2. Test result:
  • 2.3. IO connection:

MAILBOX

• 1. Mailbox_int_test
  • 1.1. Function description:
  • 1.2. Test result:
  • 1.3. IO connection:
• 2. Mailbox_read_illegal_addr_test
  • 2.1. Function description:
  • 2.2. Test result:
  • 2.3. IO connection:
• 3. Mailbox_read_test
  • 3.1. Function description:
  • 3.2. Test result:
  • 3.3. IO connection:
• 4. Mailbox_read_write_test
  • 4.1. Function description:
  • 4.2. Test result:
  • 4.3. IO connection:
• 5. Mailbox_write_illegal_addr_test
  • 5.1. Function description:
  • 5.2. Test result:
  • 5.3. IO connection:
• 6. Mailbox_write_test
  • 6.1. Function description:
  • 6.2. Test result:
  • 6.3. IO connection:

RTC

• 1. Alarm
  • 1.1. Function description:
  • 1.2. Test result:
  • 1.3. IO connection:
• 2. Alarm_int
  • 2.1. Function description:
  • 2.2. Test result:
  • 2.3. IO connection:
• 3. Counter_get
  • 3.1. Function description:
  • 3.2. Test result:
  • 3.3. IO connection:
• 4. Div_get
  • 4.1. Function description:
  • 4.2. Test result:
  • 4.3. IO connection:
• 5. Overwrite_int
  • 5.1. Function description:
  • 5.2. Test result:
  • 5.3. IO connection:
• 6. Second_int
  • 6.1. Function description:
  • 6.2. Test result:
  • 6.3. IO connection:

SDIO

• 1. Corner_feature_test
  • 1.1. Function description:
  • 1.2. Test result:
  • 1.3. IO connection:
• 2. Cpu_1bit_wr
  • 2.1. Function description:
  • 2.2. Test result:
  • 2.3. IO connection:
• 3. Cpu_8bit_wr
  • 3.1. Function description:
  • 3.2. Test result:
  • 3.3. IO connection:
• 4. Cpu_unaligned_wr
  • 4.1. Function description:
  • 4.2. Test result:
  • 4.3. IO connection:
• 5. Emmc_copy
  • 5.1. Function description:
  • 5.2. Test result:
  • 5.3. IO connection:
• 6. Sdcard_copy
  • 6.1. Function description:
  • 6.2. Test result:
  • 6.3. IO connection:
• 7. Sdio_emmc_cpu
  • 7.1. Function description:
  • 7.2. Test result:
  • 7.3. IO connection:
• 8. Sdio_emmc_cpu_ddr_8bit
  • 8.1. Function description:
  • 8.2. Test result:
  • 8.3. IO connection:
• 9. Sdio_emmc_dma
  • 9.1. Function description:
  • 9.2. Test result:
  • 9.3. IO connection:
• 10. Sdio_emmc_dma_ddr_4bit
  • 10.1. Function description:
  • 10.2. Test result:
  • 10.3. IO connection:
• 11. Sdio_emmc_multiblk_cpu
  • 11.1. Function description:
  • 11.2. Test result:
  • 11.3. IO connection:
• 12. Sdio_emmc_multiblk_dma
  • 12.1. Function description:
  • 12.2. Test result:
  • 12.3. IO connection:
• 13. Sdio_sdcard_cpu
  • 13.1. Function description:
  • 13.2. Test result:
  • 13.3. IO connection:
• 14. Sdio_sdcard_dma
  • 14.1. Function description:
  • 14.2. Test result:
  • 14.3. IO connection:
• 15. Sdio_sdcard_multiblk_cpu
  • 15.1. Function description:
  • 15.2. Test result:
  • 15.3. IO connection:
• 16. Sdio_sdcard_multiblk_dma
  • 16.1. Function description:
  • 16.2. Test result:
  • 16.3. IO connection:
• 17. Sdio_wifi_ap
  • 17.1. Function description:
  • 17.2. Test result:
  • 17.3. IO connection:
• 18. Transmitter_wr_1bit_int
  • 18.1. Function description:
  • 18.2. Test result:
  • 18.3. IO connection:
• 19. Transmitter_wr_8bit_int
  • 19.1. Function description:
  • 19.2. IO connection:
• 20. Udma_1bit_wr
  • 20.1. Function description:
  • 20.2. Test result:
  • 20.3. IO connection:
• 21. Udma_8bit_wr
  • 21.1. Function description:
  • 21.2. Test result:
  • 21.3. IO connection:

TRNG

• 1. Trng_interrupt_test
  • 1.1. Function description:
  • 1.2. Test result:
  • 1.3. IO connection:
• 2. Trng_poll_test
  • 2.1. Function description:
  • 2.2. Test result:
  • 2.3. IO connection:

USART

• 1. Autotest
  • 1.1. Function description:
  • 1.2. Test result:
  • 1.3. IO connection:
• 2. Cpu_send_dma_receive
  • 2.1. Function description:
  • 2.2. Test result:
  • 2.3. IO connection:
• 3. Dma_send_cpu_receive
  • 3.1. Function description:
  • 3.2. Test result:
  • 3.3. IO connection:
• 4. Half_duplex
  • 4.1. Function description:
  • 4.2. Test result:
  • 4.3. IO connection:
• 5. Hw_flow_ctl
  • 5.1. Function description:
  • 5.2. Test result:
  • 5.3. IO connection:
• 6. Rressure_test
  • 6.1. Function description:
  • 6.2. Test result:
  • 6.3. IO connection:
• 7. Printf
  • 7.1. Function description:
  • 7.2. Test result:
  • 7.3. IO connection:
• 8. Receiver_idle_int
  • 8.1. Function description:
  • 8.2. Test result:
  • 8.3. IO connection:
• 9. Receiver_overflow_int
  • 9.1. Function description:
  • 9.2. Test result:
  • 9.3. IO connection:
• 10. Receiver_parity_error_int
  • 10.1. Function description:
  • 10.2. Test result:
  • 10.3. IO connection:
• 11. Receiver_wm_int
  • 11.1. Function description:
  • 11.2. Test result:
  • 11.3. IO connection:
• 12. Send_receive_padma
  • 12.1. Function description:
  • 12.2. Test result:
  • 12.3. IO connection:
• 13. Send_receive_padma_all
  • 13.1. Function description:
  • 13.2. Test result:
  • 13.3. IO connection:
• 14. Send_receive_padma_continuous
  • 14.1. Function description:
  • 14.2. Test result:
  • 14.3. IO connection:
• 15. Send_receive_padma_it
  • 15.1. Function description:
  • 15.2. Test result:
  • 15.3. IO connection:
• 16. Synchronous
  • 16.1. Function description:
  • 16.2. Test result:
  • 16.3. IO connection:
• 17. Transmitter_receiver
  • 17.1. Function description:
  • 17.2. Test result:
  • 17.3. IO connection:
• 18. Transmitter_receiver_9bit
  • 18.1. Function description:
  • 18.2. Test result:
  • 18.3. IO connection:
• 19. Transmitter_receiver_int
  • 19.1. Function description:
  • 19.2. Test result:
  • 19.3. IO connection:
• 20. Transmitter_receiver_size
  • 20.1. Function description:
  • 20.2. Test result:
  • 20.3. IO connection:

XEC_GEN2

• 1. Mdio_post_read_clause_45_mode
  • 1.1. Function description:
  • 1.2. Test result:
  • 1.3. IO connection:
• 2. Mdio_rw_clause_22_mode
  • 2.1. Function description:
  • 2.2. Test result:
  • 2.3. IO connection:
• 3. Mdio_rw_clause_45_mode
  • 3.1. Function description:
  • 3.2. Test result:
  • 3.3. IO connection:
• 4. Pad_test
  • 4.1. Function description:
  • 4.2. Test result:
  • 4.3. IO connection:
• 5. Xec_mac_loopback_auto_pad
  • 5.1. Function description:
  • 5.2. Test result:
  • 5.3. IO connection:
• 6. Xec_mac_loopback_broadcast_addr
  • 6.1. Function description:
  • 6.2. Test result:
  • 6.3. IO connection:
• 7. Xec_mac_loopback_checksum
  • 7.1. Function description:
  • 7.2. Test result:
  • 7.3. IO connection:
• 8. Xec_mac_loopback_cmb
  • 8.1. Function description:
  • 8.2. Test result:
  • 8.3. IO connection:
• 9. Xec_mac_loopback_crc
  • 9.1. Function description:
  • 9.2. Test result:
  • 9.3. IO connection:
• 10. Xec_mac_loopback_d
  • 10.1. Function description:
  • 10.2. Test result:
  • 10.3. IO connection:
• 11. Xec_mac_loopback_hash_table
  • 11.1. Function description:
  • 11.2. Test result:
  • 11.3. IO connection:
• 12. xec_mac_loopback_multicase_addr
  • 12.1. Function description:
  • 12.2. Test result:
  • 12.3. IO connection:
• 13. Xec_mac_loopback_rfd_ur_it
  • 13.1. Function description:
  • 13.2. Test result:
  • 13.3. IO connection:
• 14. Xec_mac_loopback_tx_rx_size_check
  • 14.1. Function description:
  • 14.2. Test result:
  • 14.3. IO connection:
• 15. Xec_mac_loopback_unicast_addr
  • 15.1. Function description:
  • 15.2. Test result:
  • 15.3. IO connection:
• 16. Xec_mac_loopback_vlan
  • 16.1. Function description:
  • 16.2. Test result:
  • 16.3. IO connection:
• 17. Xec_max_loopback_tx_it
  • 17.1. Function description:
  • 17.2. Test result:
  • 17.3. IO connection:

ADV_TIMER

• 1. Autotest
  • 1.1. Function description:
  • 1.2. Test result:
  • 1.3. IO connection:
• 2. Complementarysignals
  • 2.1. Function description:
  • 2.2. Test result:
  • 2.3. IO connection:
  • 2.4. Output pad:
• 3. Deadtime_break
  • 3.1. Function description:
  • 3.2. Test result:
  • 3.3. IO connection:
  • 3.4. Output pad:
• 4. Dma_config
  • 4.1. Function description:
  • 4.2. Test result:
  • 4.3. IO connection:
  • 4.4. Output pad:
• 5. Exttrigger
  • 5.1. Function description:
  • 5.2. Test result:
  • 5.3. IO connection:
  • 5.4. Output pad:
• 6. Ocactive
  • 6.1. Function description:
  • 6.2. Test result:
  • 6.3. IO connection:
  • 6.4. Output pad:
• 7. Ocinactive_int
  • 7.1. Function description:
  • 7.2. Test result:
  • 7.3. IO connection:
  • 7.4. Output pad:
• 8. Pwmout
  • 8.1. Function description:
  • 8.2. Test result:
  • 8.3. IO connection:
  • 8.4. Output pad:
• 9. Singlepulse
  • 9.1. Function description:
  • 9.2. Test result:
  • 9.3. IO connection:
  • 9.4. Output pad:
• 10. Six_steps
  • 10.1. Function description:
  • 10.2. Test result:
  • 10.3. IO connection:
  • 10.4. Output pad:
• 11. Timebase
  • 11.1. Function description:
  • 11.2. Test result:
  • 11.3. IO connection:
  • 11.4. Output pad:

CRYP

• 1. Cryp_aes_cbc
  • 1.1. Function description:
  • 1.2. Test result:
  • 1.3. IO connection:
• 2. Cryp_aes_cbc_dma_append
  • 2.1. Function description:
  • 2.2. Test result:
  • 2.3. IO connection:
• 3. Cryp_aes_cbc_dma_padding
  • 3.1. Function description:
  • 3.2. Test result:
  • 3.3. IO connection:
• 4. Cryp_aes_cbc_it_append
  • 4.1. Function description:
  • 4.2. Test result:
  • 4.3. IO connection:
• 5. Cryp_aes_cbc_padding
  • 5.1. Function description:
  • 5.2. Test result:
  • 5.3. IO connection:
• 6. Cryp_aes_ccm
  • 6.1. Function description:
  • 6.2. Test result:
  • 6.3. IO connection:
• 7. Cryp_aes_ccm_dma_append
  • 7.1. Function description:
  • 7.2. Test result:
  • 7.3. IO connection:
• 8. Cryp_aes_ctr
  • 8.1. Function description:
  • 8.2. Test result:
  • 8.3. IO connection:
• 9. Cryp_aes_ctr_dma_append
  • 9.1. Function description:
  • 9.2. Test result:
  • 9.3. IO connection:
• 10. Cryp_aes_ctr_dma_padding
  • 10.1. Function description:
  • 10.2. Test result:
  • 10.3. IO connection:
• 11. Cryp_aes_ctr_padding
  • 11.1. Function description:
  • 11.2. Test result:
  • 11.3. IO connection:
• 12. Cryp_aes_ecb
  • 12.1. Function description:
  • 12.2. Test result:
  • 12.3. IO connection:
• 13. Cryp_aes_ecb_dma_append
  • 13.1. Function description:
  • 13.2. Test result:
  • 13.3. IO connection:
• 14. Cryp_aes_ecb_dma_padding
  • 14.1. Function description:
  • 14.2. Test result:
  • 14.3. IO connection:
• 15. Cryp_aes_ecb_padding
  • 15.1. Function description:
  • 15.2. Test result:
  • 15.3. IO connection:
• 16. Cryp_aes_gcm
  • 16.1. Function description:
  • 16.2. Test result:
  • 16.3. IO connection:
• 17. Cryp_aes_gcm_dma_append
  • 17.1. Function description:
  • 17.2. Test result:
  • 17.3. IO connection:
• 18. Cryp_aes_gmac
  • 18.1. Function description:
  • 18.2. Test result:
  • 18.3. IO connection:
• 19. Cryp_aes_gmac_dma_append
  • 19.1. Function description:
  • 19.2. Test result:
  • 19.3. IO connection:
• 20. Cryp_decrypt_suspend_resume
  • 20.1. Function description:
  • 20.2. Test result:
  • 20.3. IO connection:
• 21. Cryp_des_cbc
  • 21.1. Function description:
  • 21.2. Test result:
  • 21.3. IO connection:
• 22. Cryp_des_cbc_dma_append
  • 22.1. Function description:
  • 22.2. Test result:
  • 22.3. IO connection:
• 23. Cryp_des_cbc_dma_padding
  • 23.1. Function description:
  • 23.2. Test result:
  • 23.3. IO connection:
• 24. Cryp_des_cbc_padding
  • 24.1. Function description:
  • 24.2. Test result:
  • 24.3. IO connection:
• 25. Cryp_des_ecb
  • 25.1. Function description:
  • 25.2. Test result:
  • 25.3. IO connection:
• 26. Cryp_des_ecb_dma_append
  • 26.1. Function description:
  • 26.2. Test result:
  • 26.3. IO connection:
• 27. Cryp_des_ecb_dma_padding
  • 27.1. Function description:
  • 27.2. Test result:
  • 27.3. IO connection:
• 28. Cryp_des_ecb_padding
  • 28.1. Function description:
  • 28.2. Test result:
  • 28.3. IO connection:
• 29. Cryp_encrypt_suspend_resume
  • 29.1. Function description:
  • 29.2. Test result:
  • 29.3. IO connection:
• 30. Cryp_fifo_status_it
  • 30.1. Function description:
  • 30.2. Test result:
  • 30.3. IO connection:
• 31. Cryp_inout_fifo_timeout_it
  • 31.1. Function description:
  • 31.2. Test result:
  • 31.3. IO connection:
• 32. Cryp_key_prepare_it
  • 32.1. Function description:
  • 32.2. Test result:
  • 32.3. IO connection:
• 33. Cryp_sm4_cbc
  • 33.1. Function description:
  • 33.2. Test result:
  • 33.3. IO connection:
• 34. Cryp_sm4_cbc_dma_append
  • 34.1. Function description:
  • 34.2. Test result:
  • 34.3. IO connection:
• 35. Cryp_sm4_cbc_dma_padding
  • 35.1. Function description:
  • 35.2. Test result:
  • 35.3. IO connection:
• 36. Cryp_sm4_cbc_padding
  • 36.1. Function description:
  • 36.2. Test result:
  • 36.3. IO connection:
• 37. Cryp_sm4_ccm
  • 37.1. Function description:
  • 37.2. Test result:
  • 37.3. IO connection:
• 38. Cryp_sm4_ccm_dma_append
  • 38.1. Function description:
  • 38.2. Test result:
  • 38.3. IO connection:
• 39. Cryp_sm4_ctr
  • 39.1. Function description:
  • 39.2. Test result:
  • 39.3. IO connection:
• 40. Cryp_sm4_ctr_dma_append
  • 40.1. Function description:
  • 40.2. Test result:
  • 40.3. IO connection:
• 41. Cryp_sm4_ctr_dma_padding
  • 41.1. Function description:
  • 41.2. Test result:
  • 41.3. IO connection:
• 42. Cryp_sm4_ctr_paddding
  • 42.1. Function description:
  • 42.2. Test result:
  • 42.3. IO connection:
• 43. Cryp_sm4_ecb
  • 43.1. Function description:
  • 43.2. Test result:
  • 43.3. IO connection:
• 44. Cryp_sm4_ecb_dma_append
  • 44.1. Function description:
  • 44.2. Test result:
  • 44.3. IO connection:
• 45. Cryp_sm4_ecb_dma_padding
  • 45.1. Function description:
  • 45.2. Test result:
  • 45.3. IO connection:
• 46. Cryp_sm4_ecb_padding
  • 46.1. Function description:
  • 46.2. Test result:
  • 46.3. IO connection:
• 47. Cryp_sm4_gcm
  • 47.1. Function description:
  • 47.2. Test result:
  • 47.3. IO connection:
• 48. Cryp_sm4_gcm_dma_append
  • 48.1. Function description:
  • 48.2. Test result:
  • 48.3. IO connection:
• 49. Cryp_sm4_gmac
  • 49.1. Function description:
  • 49.2. Test result:
  • 49.3. IO connection:
• 50. Cryp_sm4_gmac_dma_append
  • 50.1. Function description:
  • 50.2. Test result:
  • 50.3. IO connection:
• 51. Cryp_tdes_cbc
  • 51.1. Function description:
  • 51.2. Test result:
  • 51.3. IO connection:
• 52. Cryp_tdes_cbc_dma_append
  • 52.1. Function description:
  • 52.2. Test result:
  • 52.3. IO connection:
• 53. Cryp_tdes_cbc_dma_padding
  • 53.1. Function description:
  • 53.2. Test result:
  • 53.3. IO connection:
• 54. Cryp_tdes_cbc_padding
  • 54.1. Function description:
  • 54.2. Test result:
  • 54.3. IO connection:
• 55. Cryp_tdes_ecb
  • 55.1. Function description:
  • 55.2. Test result:
  • 55.3. IO connection:
• 56. Cryp_tdes_ecb_dma_append
  • 56.1. Function description:
  • 56.2. Test result:
  • 56.3. IO connection:
• 57. Cryp_tdes_ecb_dma_padding
  • 57.1. Function description:
  • 57.2. Test result:
  • 57.3. IO connection:
• 58. Cryp_tdes_ecb_padding
  • 58.1. Function description:
  • 58.2. Test result:
  • 58.3. IO connection:

DISP

• 1. Disp_one_layer
  • 1.1. Function description:
  • 1.2. Test result:
  • 1.3. IO connection:
• 2. Disp_one_layer_lr_mirror
  • 2.1. Function description:
  • 2.2. Test result:
  • 2.3. IO connection:
• 3. Disp_one_layer_reload_line_it
  • 3.1. Function description:
  • 3.2. Test result:
  • 3.3. IO connection:
• 4. Disp_one_layer_ud_mirror
  • 4.1. Function description:
  • 4.2. Test result:
  • 4.3. IO connection:
• 5. Disp_two_layer
  • 5.1. Function description:
  • 5.2. Test result:
  • 5.3. IO connection:
• 6. G2d_m2m_pfc_to_disp_one_layer
  • 6.1. Function description:
  • 6.2. Test result:
  • 6.3. IO connection:
• 7. G2d_m2m_to_disp_one_layer
  • 7.1. Function description:
  • 7.2. Test result:
  • 7.3. IO connection:

FILTER

• 1. M_bincu_operand_a_no_out
  • 1.1. Function description:
  • 1.2. Detail configuration:
    • 1.2.1. Tx channel 0
    • 1.2.2. Rx channel
    • 1.2.3. Bincu
    • 1.2.4. Arithmetic unit
  • 1.3. Test result:
  • 1.4. IO connection:
• 2. M_bincu_operand_a_out
  • 2.1. Function description:
  • 2.2. Detail configuration:
    • 2.2.1. Tx channel 0
    • 2.2.2. Rx channel
    • 2.2.3. Bincu
    • 2.2.4. Arithmetic unit
  • 2.3. Test result:
  • 2.4. IO connection:
• 3. Mm2m_2d_to_2dcol
  • 3.1. Function description:
  • 3.2. Detail configuration:
    • 3.2.1. Tx channel 0
    • 3.2.2. Tx channel 1
    • 3.2.3. Rx Channel
    • 3.2.4. Arithmetic unit
  • 3.3. Test result:
  • 3.4. IO connection:
• 4. Mm2m_a_add_b
  • 4.1. Function description:
  • 4.2. Detail configuration:
    • 4.2.1. Tx channel 0
    • 4.2.2. Tx channel 1
    • 4.2.3. Rx channel
    • 4.2.4. Arithmetic unit
  • 4.3. Test result:
  • 4.4. IO connection:
• 5. Mm2m_a_add_reg0
  • 5.1. Function description:
  • 5.2. Detail configuration:
    • 5.2.1. Tx channel 0
    • 5.2.2. Rx channel
    • 5.2.3. Arithmetic unit
  • 5.3. Test result:
  • 5.4. IO connection:
• 6. Mm2m_a_mul_a
  • 6.1. Function description:
  • 6.2. Detail configuration:
    • 6.2.1. Tx channel 0
    • 6.2.2. Rx channel
    • 6.2.3. Arithmetic unit
  • 6.3. Test result:
  • 6.4. IO connection:
• 7. Mm2m_a_mul_a_accumulation
  • 7.1. Function description:
  • 7.2. Detail configuration:
    • 7.2.1. Tx Channel 0
    • 7.2.2. Rx Channel
    • 7.2.3. Arithmetic unit
  • 7.3. Test result:
  • 7.4. IO connection:
• 8. Mm2m_a_mul_a_accumulation_q15
  • 8.1. Function description:
  • 8.2. Detail configuration:
    • 8.2.1. Tx channel 0
    • 8.2.2. Rx channel
    • 8.2.3. Q configure
    • 8.2.4. Arithmetic unit
  • 8.3. Test result:
  • 8.4. IO connection:
• 9. Mm2m_a_mul_a_accumulation_q15_clipen
  • 9.1. Function description:
  • 9.2. Detail configuration:
    • 9.2.1. Tx channel 0
    • 9.2.2. Rx channel
    • 9.2.3. Q configure
    • 9.2.4. Arithmetic unit
  • 9.3. Test result:
  • 9.4. IO connection:
• 10. Mm2m_a_mul_a_accumulation_q31
  • 10.1. Function description:
  • 10.2. Detail configuration:
    • 10.2.1. Tx channel 0
    • 10.2.2. Rx channel
    • 10.2.3. Q configure
    • 10.2.4. Arithmetic unit
  • 10.3. Test result:
  • 10.4. IO connection:
• 11. Mm2m_a_mul_a_accumulation_q31_clipen
  • 11.1. Function description:
  • 11.2. Detail configuration:
    • 11.2.1. Tx channel 0
    • 11.2.2. Rx channel
    • 11.2.3. Q configure
    • 11.2.4. Arithmetic unit
  • 11.3. Test result:
  • 11.4. IO connection:
• 12. Mm2m_a_mul_a_accumulation_q7
  • 12.1. Function description:
  • 12.2. Detail configuration:
    • 12.2.1. Tx channel 0
    • 12.2.2. Rx channel
    • 12.2.3. Q configure
    • 12.2.4. Arithmetic unit
  • 12.3. Test result:
  • 12.4. IO connection:
• 13. Mm2m_a_mul_a_accumulation_q7_clipen
  • 13.1. Function description:
  • 13.2. Detail configuration:
    • 13.2.1. Tx channel 0
    • 13.2.2. Rx channel
    • 13.2.3. Q configure
    • 13.2.4. Arithmetic unit
  • 13.3. Test result:
  • 13.4. IO connection:
• 14. Mm2m_a_mul_a_accumulation_saturation_int
  • 14.1. Function description:
  • 14.2. Detail configuration:
    • 14.2.1. Tx channel 0
    • 14.2.2. Rx channel
    • 14.2.3. Q configure
    • 14.2.4. Arithmetic unit
  • 14.3. Test result:
  • 14.4. IO connection:
• 15. Mm2m_a_mul_a_add_b
  • 15.1. Function description:
  • 15.2. Detail configuration:
    • 15.2.1. Tx channel 0
    • 15.2.2. Tx channel 1
    • 15.2.3. Rx channel
    • 15.2.4. Arithmetic unit
  • 15.3. Test result:
  • 15.4. IO connection:
• 16. Mm2m_a_mul_a_add_reg0
  • 16.1. Function description:
  • 16.2. Detail configuration:
    • 16.2.1. Tx channel 0
    • 16.2.2. Rx channel
    • 16.2.3. Arithmetic unit
  • 16.3. Test result:
  • 16.4. IO connection:
• 17. Mm2m_a_mul_a_sub_b
  • 17.1. Function description:
  • 17.2. Detail configuration:
    • 17.2.1. Tx channel 0
    • 17.2.2. Tx channel 1
    • 17.2.3. Rx channel
    • 17.2.4. Arithmetic unit
  • 17.3. Test result:
  • 17.4. IO connection:
• 18. Mm2m_a_mul_b
  • 18.1. Function description:
  • 18.2. Detail configuration:
    • 18.2.1. Tx channel 0
    • 18.2.2. Tx channel 1
    • 18.2.3. Rx channel
    • 18.2.4. Arithmetic unit
  • 18.3. Test result:
  • 18.4. IO connection:
• 19. Mm2m_a_mul_b_accumulation
  • 19.1. Function description:
  • 19.2. Detail configuration:
    • 19.2.1. Tx channel 0
    • 19.2.2. Tx channel 1
    • 19.2.3. Rx channel
    • 19.2.4. Arithmetic unit
  • 19.3. Test result:
  • 19.4. IO connection:
• 20. Mm2m_a_mul_b_add_reg0
  • 20.1. Function description:
  • 20.2. Detail configuration:
    • 20.2.1. Tx channel 0
    • 20.2.2. Tx channel 1
    • 20.2.3. Rx channel
    • 20.2.4. Arithmetic unit
  • 20.3. Test result:
  • 20.4. IO connection:
• 21. Mm2m_a_mul_b_diff_datasize
  • 21.1. Function description:
  • 21.2. Detail Configuration:
    • 21.2.1. Tx channel 0
    • 21.2.2. Tx channel 1
    • 21.2.3. Rx channel
    • 21.2.4. Arithmetic unit
  • 21.3. Test result:
  • 21.4. IO connection:
• 22. Mm2m_a_mul_reg1
  • 22.1. Function description:
  • 22.2. Detail configuration:
    • 22.2.1. Tx channel 0
    • 22.2.2. Rx channel
    • 22.2.3. Arithmetic unit
  • 22.3. IO connection:
• 23. Mm2m_a_mul_reg1_accumulation
  • 23.1. Function description:
  • 23.2. Detail configuration:
    • 23.2.1. Tx channel 0
    • 23.2.2. Rx channel
    • 23.2.3. Arithmetic unit
  • 23.3. Test result:
  • 23.4. IO connection:
• 24. Mm2m_a_mul_reg1_add_b
  • 24.1. Function description:
  • 24.2. Detail configuration:
    • 24.2.1. Tx channel 0
    • 24.2.2. Tx channel 1
    • 24.2.3. Rx channel
    • 24.2.4. Arithmetic unit
  • 24.3. Test result:
  • 24.4. IO connection:
• 25. Mm2m_a_mul_reg1_add_reg0
  • 25.1. Function description:
  • 25.2. Detail configuration:
    • 25.2.1. Tx channel 0
    • 25.2.2. Rx channel
    • 25.2.3. Arithmetic unit
  • 25.3. Test result:
  • 25.4. IO connection:
• 26. Mm2m_a_mul_reg1_sub_b
  • 26.1. Function description:
  • 26.2. Detail configuration:
    • 26.2.1. Tx channel 0
    • 26.2.2. Tx channel 1
    • 26.2.3. Rx channel
    • 26.2.4. Arithmetic unit
  • 26.3. Test result:
  • 26.4. IO connection:
• 27. Mm2m_a_sub_b
  • 27.1. Function description:
  • 27.2. Detail configuration:
    • 27.2.1. Tx channel 0
    • 27.2.2. Tx channel 1
    • 27.2.3. Rx channel
    • 27.2.4. Arithmetic unit
  • 27.3. Test result:
  • 27.4. IO connection:
• 28. Mm2m_bincu_int
  • 28.1. Function description:
  • 28.2. Detail configuration:
    • 28.2.1. Tx channel 0
    • 28.2.2. Tx channel 1
    • 28.2.3. Rx channel
    • 28.2.4. Bincu
    • 28.2.5. Arithmetic unit
  • 28.3. Test result:
  • 28.4. IO connection:
• 29. Mm2m_calculate_error
  • 29.1. Function description:
  • 29.2. Detail configuration:
    • 29.2.1. Tx channel 0
    • 29.2.2. Tx channel 1
    • 29.2.3. Rx channel
    • 29.2.4. Arithmetic unit
  • 29.3. Test result:
  • 29.4. IO connection:
• 30. Mm2m_circular_to_2dcol
  • 30.1. Function description:
  • 30.2. Detail configuration:
    • 30.2.1. Tx channel 0
    • 30.2.2. Tx channel 1
    • 30.2.3. Rx channel
    • 30.2.4. Arithmetic unit
  • 30.3. Test result:
  • 30.4. IO connection:
• 31. Mm2m_circular_to_2drow
  • 31.1. Function description:
  • 31.2. Detail configuration:
    • 31.2.1. Tx channel 0
    • 31.2.2. Tx channel 1
    • 31.2.3. Rx channel
    • 31.2.4. Arithmetic unit
  • 31.3. Test result:
  • 31.4. IO connection:
• 32. Mm2m_configure_error
  • 32.1. Function description:
  • 32.2. Detail configuration:
    • 32.2.1. Tx channel 0
    • 32.2.2. Tx channel 1
    • 32.2.3. Rx channel
    • 32.2.4. Arithmetic unit
  • 32.3. Test result:
  • 32.4. IO connection:
• 33. Mm2m_lastcontinue_2d
  • 33.1. Function description:
  • 33.2. Detail configuration:
    • 33.2.1. Tx channel 0
    • 33.2.2. Tx channel 1
    • 33.2.3. Rx channel
    • 33.2.4. Arithmetic unit
  • 33.3. Test result:
  • 33.4. IO connection:
• 34. Mm2m_lastcontinue_address_get
  • 34.1. Function description:
  • 34.2. Detail configuration:
    • 34.2.1. Tx channel 0
    • 34.2.2. Tx channel 1
    • 34.2.3. Rx channel
    • 34.2.4. Arithmetic unit
  • 34.3. Test result:
  • 34.4. IO connection:
• 35. Mm2m_lastcontinue_sliding
  • 35.1. Function description:
  • 35.2. Detail configuration:
    • 35.2.1. Tx channel 0
    • 35.2.2. Tx channel 1
    • 35.2.3. Rx channel
    • 35.2.4. Arithmetic unit
  • 35.3. Test result:
  • 35.4. IO connection:
• 36. Mm2m_rx_ch_error
  • 36.1. Function description:
  • 36.2. Detail configuration:
    • 36.2.1. Tx channel 0
    • 36.2.2. Tx channel 1
    • 36.2.3. Rx channel
    • 36.2.4. Arithmetic unit
  • 36.3. Test result:
  • 36.4. IO connection:
• 37. Mm2m_sliding_to_2dcol
  • 37.1. Function description:
  • 37.2. Detail configuration:
    • 37.2.1. Tx channel 0
    • 37.2.2. Tx channel 1
    • 37.2.3. Rx channel
    • 37.2.4. Arithmetic unit
  • 37.3. Test result:
  • 37.4. IO connection:
• 38. Mm2m_transfer_int
  • 38.1. Function description:
  • 38.2. Detail configuration:
    • 38.2.1. Tx channel 0
    • 38.2.2. Tx channel 1
    • 38.2.3. Rx channel
    • 38.2.4. Arithmetic unit
  • 38.3. Test result:
  • 38.4. IO connection:
• 39. Mm2m_tx_ch0_error
  • 39.1. Function description:
  • 39.2. Detail configuration:
    • 39.2.1. Tx channel 0
    • 39.2.2. Tx channel 1
    • 39.2.3. Rx channel
    • 39.2.4. Arithmetic unit
  • 39.3. Test result:
  • 39.4. IO connection:
• 40. Mm2m_tx_ch1_error
  • 40.1. Function description:
  • 40.2. Detail configuration:
    • 40.2.1. Tx channel 0
    • 40.2.2. Tx channel 1
    • 40.2.3. Rx channel
    • 40.2.4. Arithmetic unit
  • 40.3. Test result:
  • 40.4. IO connection:
• 41. Mm_bincu_operand_ab_no_out
  • 41.1. Function description:
  • 41.2. Detail configuration:
    • 41.2.1. Tx channel 0
    • 41.2.2. Tx channel 1
    • 41.2.3. Rx channel
    • 41.2.4. Bincu
    • 41.2.5. Arithmetic unit
  • 41.3. Test result:
  • 41.4. IO connection:
• 42. Mm_bincu_operand_ab_out
  • 42.1. Function description:
  • 42.2. Detail configuration:
    • 42.2.1. Tx channel 0
    • 42.2.2. Tx channel 1
    • 42.2.3. Rx channel
    • 42.2.4. Bincu
    • 42.2.5. Arithmetic unit
  • 42.3. Test result:
  • 42.4. IO connection:

G2D

• 1. G2d_m2m
  • 1.1. Function description:
  • 1.2. Test result:
  • 1.3. IO connection:
• 2. G2d_m2m_blend
  • 2.1. Function description:
  • 2.2. Test result:
  • 2.3. IO connection:
• 3. G2d_m2m_cut_window
  • 3.1. Function description:
  • 3.2. Test result:
  • 3.3. IO connection:
• 4. G2d_m2m_cut_window_mirror_x_argb8888
  • 4.1. Function description:
  • 4.2. Test result:
  • 4.3. IO connection:
• 5. G2d_m2m_down_sample
  • 5.1. Function description:
  • 5.2. Test result:
  • 5.3. IO connection:
• 6. G2d_m2m_mirror_x
  • 6.1. Function description:
  • 6.2. Test result:
  • 6.3. IO connection:
• 7. G2d_m2m_mirror_xy
  • 7.1. Function description:
  • 7.2. Test result:
  • 7.3. IO connection:
• 8. G2d_m2m_mirror_xy_cut_window_l8
  • 8.1. Function description:
  • 8.2. Test result:
  • 8.3. IO connection:
• 9. G2d_m2m_mirror_y
  • 9.1. Function description:
  • 9.2. Test result:
  • 9.3. IO connection:
• 10. G2d_m2m_mirror_y_cut_window_rgb565
  • 10.1. Function description:
  • 10.2. Test result:
  • 10.3. IO connection:
• 11. G2d_m2m_mv_from_flash
  • 11.1. Function description:
  • 11.2. Test result:
  • 11.3. IO connection:
• 12. G2d_m2m_pfc
  • 12.1. Function description:
  • 12.2. Test result:
  • 12.3. IO connection:
• 13. G2d_m2m_pfc_cfg_err_it
  • 13.1. Function description:
  • 13.2. Test result:
  • 13.3. IO connection:
• 14. G2d_m2m_pfc_clut_access_err_it
  • 14.1. Function description:
  • 14.2. Test result:
  • 14.3. IO connection:
• 15. G2d_m2m_pfc_input_pixel_order_bgr
  • 15.1. Function description:
  • 15.2. Test result:
  • 15.3. IO connection:
• 16. G2d_m2m_pfc_it
  • 16.1. Function description:
  • 16.2. Test result:
  • 16.3. IO connection:
• 17. G2d_m2m_pfc_output_pixel_order_bgr
  • 17.1. Function description:
  • 17.2. Test result:
  • 17.3. IO connection:
• 18. G2d_m2m_pfc_suspend
  • 18.1. Function description:
  • 18.2. Test result:
  • 18.3. IO connection:
• 19. G2d_r2m
  • 19.1. Function description:
  • 19.2. Test result:
  • 19.3. IO connection:
• 20. G2d_r2m_abort
  • 20.1. Function description:
  • 20.2. Test result:
  • 20.3. IO connection:

HASH

• 1. Data_length_err_it
  • 1.1. Function description:
  • 1.2. Main configuration:
  • 1.3. Test result:
  • 1.4. IO connection:
• 2. Fifo_full_it
  • 2.1. Function description:
  • 2.2. Main configuration:
  • 2.3. Test result:
  • 2.4. IO connection:
• 3. Fifo_request_it
  • 3.1. Function description:
  • 3.2. Main configuration:
  • 3.3. Test result:
  • 3.4. IO connection:
• 4. Fifo_timeout_it
  • 4.1. Function description:
  • 4.2. Main configuration:
  • 4.3. Test result:
  • 4.4. IO connection:
• 5. Hash_md5
  • 5.1. Function description:
  • 5.2. Main configuration:
    • 5.2.1. Hash configure
  • 5.3. Test result:
  • 5.4. IO connection:
• 6. Hash_md5_dma
  • 6.1. Function description:
  • 6.2. Main configuration:
    • 6.2.1. Hash configure
    • 6.2.2. Udma p2m configure
  • 6.3. Test result:
  • 6.4. IO connection:
• 7. Hash_sha1
  • 7.1. Function description:
  • 7.2. Main configuration:
    • 7.2.1. Hash configure
  • 7.3. Test result:
  • 7.4. IO connection:
• 8. Hash_sha1_dma
  • 8.1. Function description:
  • 8.2. Main configuration:
    • 8.2.1. Hash configure
    • 8.2.2. Udma p2m configure
  • 8.3. Test result:
  • 8.4. IO connection:
• 9. Hash_sha224
  • 9.1. Function description:
  • 9.2. Main configuration:
    • 9.2.1. Hash configure
  • 9.3. Test result:
  • 9.4. IO connection:
• 10. Hash_sha224_dma
  • 10.1. Function description:
  • 10.2. Main configuration:
    • 10.2.1. Hash configure
    • 10.2.2. Udma p2m configure
  • 10.3. Test result:
  • 10.4. IO connection:
• 11. Hash_sha256
  • 11.1. Function description:
  • 11.2. Main configuration:
    • 11.2.1. Hash configure
  • 11.3. Test result:
  • 11.4. IO connection:
• 12. Hash_sha256_dma
  • 12.1. Function description:
  • 12.2. Main configuration:
    • 12.2.1. Hash configure
    • 12.2.2. Udma p2m configure
  • 12.3. Test result:
  • 12.4. IO connection:
• 13. Hash_sha384
  • 13.1. Function description:
  • 13.2. Main configuration:
    • 13.2.1. Hash configure
  • 13.3. Test result:
  • 13.4. IO connection:
• 14. Hash_sha384_dma
  • 14.1. Function description:
  • 14.2. Main configuration:
    • 14.2.1. Hash configure
    • 14.2.2. Udma p2m configure
  • 14.3. Test result:
  • 14.4. IO connection:
• 15. Hash_sha512
  • 15.1. Function description:
  • 15.2. Main configuration:
    • 15.2.1. Hash configure
  • 15.3. Test result:
  • 15.4. IO connection:
• 16. Hash_sha512_dma
  • 16.1. Function description:
  • 16.2. Main configuration:
    • 16.2.1. Hash configure
    • 16.2.2. Udma p2m configure
  • 16.3. Test result:
  • 16.4. IO connection:
• 17. Hash_sha512_multi_seg
  • 17.1. Function description:
  • 17.2. Main configuration:
  • 17.3. Test result:
  • 17.4. IO connection:
• 18. Hash_sha512_suspend
  • 18.1. Function description:
  • 18.2. Main configuration:
    • 18.2.1. Hash configure
  • 18.3. Test result:
  • 18.4. IO connection:
• 19. Hash_sm3
  • 19.1. Function description:
  • 19.2. Main configuration:
    • 19.2.1. Hash configure
  • 19.3. Test result:
  • 19.4. IO connection:
• 20. Hash_sm3_dma
  • 20.1. Function description:
  • 20.2. Main configuration:
    • 20.2.1. Hash configure
    • 20.2.2. Udma p2m configure
  • 20.3. Test result:
  • 20.4. IO connection:
• 21. Hmac_md5
  • 21.1. Function description:
  • 21.2. Main configuration:
    • 21.2.1. Hash configure
  • 21.3. Test result:
  • 21.4. IO connection:
• 22. Hmac_md5_dma
  • 22.1. Function description:
  • 22.2. Main configuration:
    • 22.2.1. Hash configure
    • 22.2.2. Udma p2m configure
  • 22.3. Test result:
  • 22.4. IO connection:
• 23. Hmac_sha1
  • 23.1. Function description:
  • 23.2. Main configuration:
    • 23.2.1. Hash configure
  • 23.3. Test result:
  • 23.4. IO connection:
• 24. Hmac_sha1_dma
  • 24.1. Function description:
  • 24.2. Main configuration:
    • 24.2.1. Hash configure
    • 24.2.2. Udma p2m configure
  • 24.3. Test result:
  • 24.4. IO connection:
• 25. Hmac_sha224
  • 25.1. Function description:
  • 25.2. Main configuration:
    • 25.2.1. Hash configure
  • 25.3. Test result:
  • 25.4. IO connection:
• 26. Hmac_sha224_dma
  • 26.1. Function description:
  • 26.2. Main configuration:
    • 26.2.1. Hash configure
    • 26.2.2. Udma p2m configure
  • 26.3. Test result:
  • 26.4. IO connection:
• 27. Hmac_sha256
  • 27.1. Function description:
  • 27.2. Main configuration:
    • 27.2.1. Hash configure
  • 27.3. Test result:
  • 27.4. IO connection:
• 28. Hmac_sha256_dma
  • 28.1. Function description:
  • 28.2. Main configuration:
    • 28.2.1. Hash configure
    • 28.2.2. Udma p2m configure
  • 28.3. Test result:
  • 28.4. IO connection:
• 29. Hmac_sha384
  • 29.1. Function description:
  • 29.2. Main configuration:
    • 29.2.1. Hash configure
  • 29.3. Test result:
  • 29.4. IO connection:
• 30. Hmac_sha384_dma
  • 30.1. Function description:
  • 30.2. Main configuration:
    • 30.2.1. Hash configure
    • 30.2.2. Udma p2m configure
  • 30.3. Test result:
  • 30.4. IO connection:
• 31. Hmac_sha512
  • 31.1. Function description:
  • 31.2. Main configuration:
    • 31.2.1. Hash configure
  • 31.3. Test result:
  • 31.4. IO connection:
• 32. Hmac_sha512_dma
  • 32.1. Function description:
  • 32.2. Main configuration:
    • 32.2.1. Hash configure
    • 32.2.2. Udma p2m configure
  • 32.3. Test result:
  • 32.4. IO connection:
• 33. Hmac_sm3
  • 33.1. Function description:
  • 33.2. Main configuration:
    • 33.2.1. Hash configure
  • 33.3. Test result:
  • 33.4. IO connection:
• 34. Hmac_sm3_dma
  • 34.1. Function description:
  • 34.2. Main configuration:
    • 34.2.1. Hash configure
    • 34.2.2. Udma p2m configure
  • 34.3. Test result:
  • 34.4. IO connection:
• 35. Opad_it
  • 35.1. Function description:
  • 35.2. Main configuration:
  • 35.3. Test result:
  • 35.4. IO connection:
• 36. Seg_done_it
  • 36.1. Function description:
  • 36.2. Main configuration:
  • 36.3. Test result:
  • 36.4. IO connection:

I2C

• 1. I2C_24LC04B
  • 1.1. Function description:
  • 1.2. Test result:
  • 1.3. IO connection:
• 2. I2C_AT24C02
  • 2.1. Function description:
  • 2.2. Test result:
  • 2.3. IO connection:
• 3. I2C_cpu_send_cpu_recv_int
  • 3.1. Function description:
  • 3.2. Test result:
  • 3.3. IO connection:
• 4. I2C_eeprom_padma
  • 4.1. Function description:
  • 4.2. Test result:
  • 4.3. IO connection:
• 5. I2C_interrupt
  • 5.1. Function description:
  • 5.2. Test result:
  • 5.3. IO connection:
• 6. I2C_master_cpu_recv_slave_cpu_send
  • 6.1. Function description:
  • 6.2. Test result:
  • 6.3. IO connection:
• 7. I2C_master_cpu_recv_slave_dma_send
  • 7.1. Function description:
  • 7.2. Test result:
  • 7.3. IO connection:
• 8. I2C_master_cpu_recv_slave_dma_send_word
  • 8.1. Function description:
  • 8.2. Test result:
  • 8.3. IO connection:
• 9. I2C_master_cpu_send_slave_cpu_recv
  • 9.1. Function description:
  • 9.2. Test result:
  • 9.3. IO connection:
• 10. I2C_master_dma_send_slave_dma_recv_word
  • 10.1. Function description:
  • 10.2. Test result:
  • 10.3. IO connection:
• 11. I2C_master_dma_recv_slave_cpu_send
  • 11.1. Function description:
  • 11.2. Test result:
  • 11.3. IO connection:
• 12. I2C_master_dma_recv_slave_cpu_send_shadow
  • 12.1. Function description:
  • 12.2. Test result:
  • 12.3. IO connection:
• 13. I2C_master_dma_recv_slave_cpu_send_shadow
  • 13.1. Function description:
  • 13.2. Test result:
  • 13.3. IO connection:
• 14. I2C_master_dma_send_slave_cpu_recv
  • 14.1. Function description:
  • 14.2. Test result:
  • 14.3. IO connection:
• 15. I2C_master_dma_send_slave_dma_recv
  • 15.1. Function description:
  • 15.2. Test result:
  • 15.3. IO connection:
• 16. I2C_master_dma_send_slave_dma_recv_word
  • 16.1. Function description:
  • 16.2. Test result:
  • 16.3. IO connection:
• 17. I2C_master_padma_recv_slave_padma_send
  • 17.1. Function description:
    • 17.1.1. Slave_tx_dma_channel:
    • 17.1.2. Master_rx_dma_channel:
  • 17.2. Test result:
  • 17.3. IO connection:
• 18. I2C_master_padma_send_slave_padma_recv
  • 18.1. Function description:
    • 18.1.1. Master_tx_dma_channel:
    • 18.1.2. Slave_rx_dma_channel:
  • 18.2. Test result:
  • 18.3. IO connection:
• 19. I2C_master_padma_send_slave_padma_recv_continuous
  • 19.1. Function description:
    • 19.1.1. Master_tx_dma_channel:
    • 19.1.2. Slave_rx_dma_channel:
  • 19.2. Test result:
  • 19.3. IO connection:
• 20. I2C_master_padma_send_slave_padma_recv_it
  • 20.1. Function description:
    • 20.1.1. Master_tx_dma_channel:
    • 20.1.2. Slave_rx_dma_channel:
  • 20.2. Test result:
  • 20.3. IO connection:
• 21. I2C_pressure_test
  • 21.1. Function description:
  • 21.2. Test result:
  • 21.3. IO connection:

LGPIO

• 1. autotest
  • 1.1. Function description:
  • 1.2. Test result:
  • 1.3. IO connection:
• 2. input_level
  • 2.1. Function description:
  • 2.2. Test result:
  • 2.3. IO connection:
• 3. interrupt
  • 3.1. Function description:
  • 3.2. Test result:
  • 3.3. IO connection:
• 4. irq_status_interrupt
  • 4.1. Function description:
  • 4.2. Test result:
  • 4.3. IO connection:
• 5. lgpio_evasion_mode
  • 5.1. Function description:
  • 5.2. Test result:
  • 5.3. IO connection:
• 6. input_level
  • 6.1. Function description:
  • 6.2. Test result:
  • 6.3. IO connection:
• 7. software_interrupt
  • 7.1. Function description:
  • 7.2. Test result:
  • 7.3. IO connection:

PCRC

• 1. Crc16
  • 1.1. Function description:
  • 1.2. Detail configuration:
    • 1.2.1. Crc16/ibm
    • 1.2.2. Crc16/maxim
    • 1.2.3. Crc16/usb
    • 1.2.4. Crc16/modbus
    • 1.2.5. Crc16/ccitt
    • 1.2.6. Crc16/ccitt-false
    • 1.2.7. Crc16/x25
    • 1.2.8. Crc16/xmodem
    • 1.2.9. Crc16/dnp
  • 1.3. Test result:
  • 1.4. IO connection:
• 2. Crc32
  • 2.1. Function description:
  • 2.2. Detail configuration:
    • 2.2.1. Crc32
    • 2.2.2. Crc32/itu
  • 2.3. Test result:
  • 2.4. IO connection:
• 3. Crc7
  • 3.1. Function description:
  • 3.2. Detail configuration:
    • 3.2.1. Crc7/mmc
  • 3.3. Test result:
  • 3.4. IO connection:
• 4. Crc8
  • 4.1. Function description:
  • 4.2. Detail configuration:
    • 4.2.1. Crc8
    • 4.2.2. Crc8/itu
    • 4.2.3. Crc8/rohc
    • 4.2.4. Crc8/maxim
  • 4.3. Test result:
  • 4.4. IO connection:

SAI

• 1. G0_sai0a_master_rx_dma_g0_sai0b_slave_tx_dma
  • 1.1. Function description:
  • 1.2. Test result:
  • 1.3. IO connection:
• 2. G0_sai0a_master_rx_dma_g0_sai0b_slave_tx_dma_left
  • 2.1. Function description:
  • 2.2. Test result:
  • 2.3. IO connection:
• 3. G0_sai0a_master_rx_dma_g0_sai0b_slave_tx_dma_pcm
  • 3.1. Function description:
  • 3.2. Test result:
  • 3.3. IO connection:
• 4. G0_sai0a_master_rx_int_g0_sai0b_slave_tx_int
  • 4.1. Function description:
  • 4.2. Test result:
  • 4.3. IO connection:
• 5. G0_sai0a_master_rx_int_g0_sai0b_slave_tx_int_left
  • 5.1. Function description:
  • 5.2. Test result:
  • 5.3. IO connection:
• 6. G0_sai0a_master_rx_int_g0_sai0b_slave_tx_int_pcm
  • 6.1. Function description:
  • 6.2. Test result:
  • 6.3. IO connection:
• 7. G0_sai0a_master_tx_dma_g0_sai0b_slave_rx_dma
  • 7.1. Function description:
  • 7.2. Test result:
  • 7.3. IO connection:
• 8. G0_sai0a_master_tx_dma_g0_sai0b_slave_rx_dma_left
  • 8.1. Function description:
  • 8.2. Test result:
  • 8.3. IO connection:
• 9. G0_sai0a_master_tx_dma_g0_sai0b_slave_rx_dma_pcm
  • 9.1. Function description:
  • 9.2. Test result:
  • 9.3. IO connection:
• 10. G0_sai0a_master_tx_int_g0_sai0b_slave_rx_int
  • 10.1. Function description:
  • 10.2. Test result:
  • 10.3. IO connection:
• 11. G0_sai0a_master_tx_int_g0_sai0b_slave_rx_int_left
  • 11.1. Function description:
  • 11.2. Test result:
  • 11.3. IO connection:
• 12. G0_sai0a_master_tx_int_g0_sai0b_slave_rx_int_pcm
  • 12.1. Function description:
  • 12.2. Test result:
  • 12.3. IO connection:

SPI

• 1. Master_slave_fullduplex_ssm_hard
  • 1.1. Function description:
  • 1.2. Test result:
  • 1.3. IO connection:
• 2. Master_slave_fullduplex_ssm_soft
  • 2.1. Function description:
  • 2.2. Test result:
  • 2.3. IO connection:
• 3. Master_slave_udma_continous_clr
  • 3.1. Function description:
  • 3.2. Test result:
  • 3.3. IO connection:
• 4. Master_transmit_slave_receive_int
  • 4.1. Function description:
  • 4.2. Test result:
  • 4.3. IO connection:
• 5. Spi_2_line
  • 5.1. Function description:
  • 5.2. Test result:
  • 5.3. IO connection:
• 6. Spi_4_line
  • 6.1. Function description:
  • 6.2. Test result:
  • 6.3. IO connection:
• 7. Spi_autotest
  • 7.1. Function description:
  • 7.2. Test result:
  • 7.3. IO connection:
• 8. Spi_dma_software_reset
  • 8.1. Function description:
  • 8.2. Test result:
  • 8.3. IO connection:
• 9. Spi_flash
  • 9.1. Function description:
  • 9.2. Test result:
  • 9.3. IO connection:
• 10. Spi_flash_3byte_addr
  • 10.1. Function description:
  • 10.2. Test result:
  • 10.3. IO connection:
• 11. Spi_flash_4byte_addr
  • 11.1. Function description:
  • 11.2. Test result:
  • 11.3. IO connection:
• 12. spi_flash_ddr_wr
  • 12.1. Function description:
  • 12.2. Test result:
  • 12.3. IO connection:
• 13. Spi_half_duplex
  • 13.1. Function description:
  • 13.2. Test result:
  • 13.3. IO connection:
• 14. Spi_master_slave_padma
  • 14.1. Function description:
    • 14.1.1. Padma configure
  • 14.2. Test result:
  • 14.3. IO connection:
• 15. Spi_master_slave_padma_all
  • 15.1. Function description:
    • 15.1.1. Padma configure
  • 15.2. Test result:
  • 15.3. IO connection:
• 16. Spi_master_slave_padma_continuous
  • 16.1. Function description:
    • 16.1.1. Padma configure
  • 16.2. Test result:
  • 16.3. IO connection:
• 17. Spi_master_slave_padma_it
  • 17.1. Function description:
    • 17.1.1. Padma configure
  • 17.2. Test result:
  • 17.3. IO connection:
• 18. Spi_master_slave_udma
  • 18.1. Function description:
  • 18.2. Test result:
  • 18.3. IO connection:
• 19. Spi_master_slave_udma_fd
  • 19.1. Function description:
  • 19.2. Test result:
  • 19.3. IO connection:
• 20. Spi_master_slave_udma_int
  • 20.1. Function description:
  • 20.2. Test result:
  • 20.3. IO connection:
• 21. Spi_master_slave_udma_shadow
  • 21.1. Function description:
  • 21.2. Test result:
  • 21.3. IO connection:
• 22. spi_xip_flash_wr
  • 22.1. Function description:
  • 22.2. Test result:
  • 22.3. IO connection:
• 23. Underflow_overflow_int
  • 23.1. Function description:
  • 23.2. Test result:
  • 23.3. IO connection:

UDMA

• 1. M2m
  • 1.1. Function description:
  • 1.2. Main Configuration:
    • 1.2.1. Udma m2m configure
  • 1.3. Test result:
  • 1.4. IO connection:
• 2. M2m_burst
  • 2.1. Function description:
  • 2.2. Main Configuration:
    • 2.2.1. Udma m2m configure
  • 2.3. Test result:
  • 2.4. IO connection:
• 3. M2m_continue_mode
  • 3.1. Function description:
  • 3.2. Main Configuration:
    • 3.2.1. Udma m2m configure
  • 3.3. Test result:
  • 3.4. IO connection:
• 4. M2m_fixed_addr
  • 4.1. Function description:
  • 4.2. Main Configuration:
    • 4.2.1. Udma m2m configure
  • 4.3. Test result:
  • 4.4. IO connection:
• 5. M2m_int
  • 5.1. Function description:
  • 5.2. Main Configuration:
    • 5.2.1. Udma m2m configure
  • 5.3. Test result:
  • 5.4. IO connection:
• 6. M2m_lla
  • 6.1. Function description:
  • 6.2. Main Configuration:
    • 6.2.1. Udma m2m configure
  • 6.3. Test result:
  • 6.4. IO connection:
• 7. M2m_repeat_mode
  • 7.1. Function description:
  • 7.2. Main Configuration:
    • 7.2.1. Udma m2m configure
  • 7.3. Test result:
  • 7.4. IO connection:
• 8. M2m_repeat_mode_addr_acc_increasing
  • 8.1. Function description:
  • 8.2. Main Configuration:
    • 8.2.1. Udma m2m configure
  • 8.3. Test result:
  • 8.4. IO connection:
• 9. M2m_repeat_mode_trigger_last_transfer_irq
  • 9.1. Function description:
  • 9.2. Main Configuration:
    • 9.2.1. Udma m2m configure
  • 9.3. Test result:
  • 9.4. IO connection:
• 10. M2m_src_c_dst_f
  • 10.1. Function description:
  • 10.2. Main Configuration:
    • 10.2.1. Udma m2m configure
  • 10.3. Test result:
  • 10.4. IO connection:
• 11. M2m_src_f_dst_c
  • 11.1. Function description:
  • 11.2. Main Configuration:
    • 11.2.1. Udma m2m configure
  • 11.3. Test result:
  • 11.4. IO connection:

WWDG

• 1. Delay_feed_reset
  • 1.1. Function description:
  • 1.2. Test result:
  • 1.3. IO connection:
• 2. Early_feed_reset
  • 2.1. Function description:
  • 2.2. Test result:
  • 2.3. IO connection:
• 3. Early_interrupt
  • 3.1. Function description:
  • 3.2. Test result:
  • 3.3. IO connection: