4. Crc8

4.1. Function description:

This demo shows the calculation of 8 bits CRC.

Configure the size of the polynomial is 8 bits for CRC8 calculation.

• Configure the CRC8.

• Write data to CRC calculator to start hardware calculation.

• Calculate the result of the CRC8 by software, then to compare with the hardware.

4.2. Detail configuration:

4.2.1. Crc8

Initial value	Reverse input	Reverse output	Polynomial size	Coefficients	Xor value
0	no	no	8 bits	0x07	0

4.2.2. Crc8/itu

Initial value	Reverse input	Reverse output	Polynomial size	Coefficients	Xor value
0	no	no	8 bits	0x07	0x55

4.2.3. Crc8/rohc

Initial value	Reverse input	Reverse output	Polynomial size	Coefficients	Xor value
0xFF	no	no	8 bits	0x07	0

4.2.4. Crc8/maxim

Initial value	Reverse input	Reverse output	Polynomial size	Coefficients	Xor value
0	byte	byte	8 bits	0x07	0x31

4.3. Test result:

If the output result is same as the result calculated by software according to the theory, then print "pass", or print "fail".

4.4. IO connection:

None