18. G2d_m2m_pfc_suspend

18.1. Function description:

This demo shows the function of suspend & resume.

Convert the L8 to RGB888 output with G2D memory-to-memory with pixel format conversion mode:

  • Configure the G2D memory-to-memory with pixel format conversion mode.

  • Configure & load the G2D foreground CLUT.

  • Configure the G2D foreground layer and start transfer.

  • After transfer half to suspend G2D, then delay to resume the transformation.

  • After the transfer completion, compare the output data with the golden data.

18.2. Test result:

After the operation of suspend & resume, if the output result is also same as the standard data calculated by software, then print pass, if not print fail.

18.3. IO connection:

None