3. G2d_m2m_cut_window

3.1. Function description:

This demo shows the G2D Memory-to-Memory Conversion Mode with cut window function.

Convert the ARGB8888 to ARGB8888 output with cut window function:

• Configure the G2D memory-to-memory mode.

• Configure cut window and enable the function

• Configure the G2D foreground layer and start transfer.

• After the transfer completion, compare the output data with the golden data.

3.2. Test result:

If the output result is same as the standard data calculated by software, then print pass, if not print fail.

3.3. IO connection:

None