1. Acryp_completion_it

1.1. Function description:

This demo shows how to trigger Operation Completion Interrupt, the operation is modular in GF(p).

Enable global interrupt & register ACRYP interrupt.
Enable the related interrupt.
Allocate enough memory space of SRAM used by internal logic during computation.
Filling data to operand a & b address.
Configure & start modular operation.
To compare the result with the golden data to check after triggering & entering the interrupt service routine.

Note

The length of operand a must greater than operand b.

Operation code	Option	Field	Operand a length	Operand b length
OP_MOD	ordinary	GF(p)	5 words	5 words

If successfully trigger and enter interrupt service routine, and the result is same as the standard data, then print pass, if not print fail.

None