5. Exttrigger

5.1. Function description:

This demo shows how to start TIMER peripherals with an external trigger. ADVANCED_TIMERn is configured as slave timer for an external trigger connected to ADVANCED_TIMERn_CH3 pin:

The ADVANCED_TIMERn_CH1 is used as trigger input.

Rising edge is used to start the ADVANCED_TIMERn: event mode.

The starts of the ADVANCED_TIMERn counter are controlled by the external trigger.

5.2. Test result:

The output signal as the following description:

The channel 2 duty cycle is set to %50.

5.3. IO connection:

NONE

5.4. Output pad:

PAD
pad_ADVANCED_TIMERn_bkin
pad_ADVANCED_TIMERn_etr
pad_ADVANCED_TIMERn_ch1_i
pad_ADVANCED_TIMERn_ch2_i
pad_ADVANCED_TIMERn_ch3_i

Note

The ‘m’ and ‘n’ in “advtimer_timerm” and “advtimer_timern” indicate the peripheral number.