Complex FFT Functions

Modules
	Complex FFT Tables
	Complex FFT F16
	Complex FFT F32
	Complex FFT F64
	Complex FFT Q15
	Complex FFT Q31
	Deprecated Complex FFT functions

Detailed Description

The Fast Fourier Transform (FFT) is an efficient algorithm for computing the Discrete Fourier Transform (DFT). The FFT can be orders of magnitude faster than the DFT, especially for long lengths. The algorithms described in this section operate on complex data. A separate set of functions is devoted to handling of real sequences.

There are separate algorithms for handling floating-point, Q15, and Q31 data types. The algorithms available for each data type are described next.

The FFT functions operate in-place. That is, the array holding the input data will also be used to hold the corresponding result. The input data is complex and contains 2*fftLen interleaved values as shown below.

{real[0], imag[0], real[1], imag[1], ...} 

The FFT result will be contained in the same array and the frequency domain values will have the same interleaving.

Floating-point

The floating-point complex FFT uses a mixed-radix algorithm. Multiple radix-8 stages are performed along with a single radix-2 or radix-4 stage, as needed. The algorithm supports lengths of [16, 32, 64, ..., 4096] and each length uses a different twiddle factor table.

The function uses the standard FFT definition and output values may grow by a factor of fftLen when computing the forward transform. The inverse transform includes a scale of 1/fftLen as part of the calculation and this matches the textbook definition of the inverse FFT.

For the MVE version, the new riscv_cfft_init_f32 initialization function is mandatory. Compilation flags are available to include only the required tables for the needed FFTs. Other FFT versions can continue to be initialized as explained below.

For not MVE versions, pre-initialized data structures containing twiddle factors and bit reversal tables are provided and defined in riscv_const_structs.h. Include this header in your function and then pass one of the constant structures as an argument to riscv_cfft_f32. For example:

riscv_cfft_f32(riscv_cfft_sR_f32_len64, pSrc, 1, 1)

computes a 64-point inverse complex FFT including bit reversal. The data structures are treated as constant data and not modified during the calculation. The same data structure can be reused for multiple transforms including mixing forward and inverse transforms.

Earlier releases of the library provided separate radix-2 and radix-4 algorithms that operated on floating-point data. These functions are still provided but are deprecated. The older functions are slower and less general than the new functions.

An example of initialization of the constants for the riscv_cfft_f32 function follows:

const static riscv_cfft_instance_f32 *S;
...
switch (length) {
  case 16:
    S = &riscv_cfft_sR_f32_len16;
    break;
  case 32:
    S = &riscv_cfft_sR_f32_len32;
    break;
  case 64:
    S = &riscv_cfft_sR_f32_len64;
    break;
  case 128:
    S = &riscv_cfft_sR_f32_len128;
    break;
  case 256:
    S = &riscv_cfft_sR_f32_len256;
    break;
  case 512:
    S = &riscv_cfft_sR_f32_len512;
    break;
  case 1024:
    S = &riscv_cfft_sR_f32_len1024;
    break;
  case 2048:
    S = &riscv_cfft_sR_f32_len2048;
    break;
  case 4096:
    S = &riscv_cfft_sR_f32_len4096;
    break;
}

The new riscv_cfft_init_f32 can also be used.

Q15 and Q31

The floating-point complex FFT uses a mixed-radix algorithm. Multiple radix-4 stages are performed along with a single radix-2 stage, as needed. The algorithm supports lengths of [16, 32, 64, ..., 4096] and each length uses a different twiddle factor table.

The function uses the standard FFT definition and output values may grow by a factor of fftLen when computing the forward transform. The inverse transform includes a scale of 1/fftLen as part of the calculation and this matches the textbook definition of the inverse FFT.

Pre-initialized data structures containing twiddle factors and bit reversal tables are provided and defined in riscv_const_structs.h. Include this header in your function and then pass one of the constant structures as an argument to riscv_cfft_q31. For example:

riscv_cfft_q31(riscv_cfft_sR_q31_len64, pSrc, 1, 1)

computes a 64-point inverse complex FFT including bit reversal. The data structures are treated as constant data and not modified during the calculation. The same data structure can be reused for multiple transforms including mixing forward and inverse transforms.

Earlier releases of the library provided separate radix-2 and radix-4 algorithms that operated on floating-point data. These functions are still provided but are deprecated. The older functions are slower and less general than the new functions.

An example of initialization of the constants for the riscv_cfft_q31 function follows:

const static riscv_cfft_instance_q31 *S;
...
  switch (length) {
    case 16:
      S = &riscv_cfft_sR_q31_len16;
      break;
    case 32:
      S = &riscv_cfft_sR_q31_len32;
      break;
    case 64:
      S = &riscv_cfft_sR_q31_len64;
      break;
    case 128:
      S = &riscv_cfft_sR_q31_len128;
      break;
    case 256:
      S = &riscv_cfft_sR_q31_len256;
      break;
    case 512:
      S = &riscv_cfft_sR_q31_len512;
      break;
    case 1024:
      S = &riscv_cfft_sR_q31_len1024;
      break;
    case 2048:
      S = &riscv_cfft_sR_q31_len2048;
      break;
    case 4096:
      S = &riscv_cfft_sR_q31_len4096;
      break;
  }